Mediastar Ms-Diamond X1 and X2 Boot Problem Solution

Solution for Boot Problems on Mediastar MS Diamond X1 and X2 Satellite Receivers

If you’re experiencing boot issues with your Mediastar MS Diamond Z1 or Z2 satellite receiver, follow these steps to restore your device effectively.

Step-by-Step Guide to Fix Boot Problems

1. Rename the Update File
   Rename your firmware update file to RomUpdate.bin. This ensures that the receiver can recognize and process the file correctly.
2. Create a USB Folder
   Create a folder named RomUpdate directly in the root directory of your USB drive. This specific naming is crucial for the update process to function properly.
3. Transfer the Update File
   Move the RomUpdate.bin file into the RomUpdate folder on your USB drive. Ensure the file is placed in the correct folder to avoid any update errors.
4. Prepare Your Receiver
   Power off your Mediastar device completely. Connect the USB drive containing the update file.
5. Initiate the Update Process
   Turn on your device while pressing and holding the “Power” button on the front panel. Continue holding the button until “UPDATE” appears on the display. This action will start the automatic update process.
6. Wait for Reboot
   After the update is complete, your device will automatically reboot. It should now boot into the normal system, resolving any previous boot issues.

Additional Tips

• Ensure that your USB drive is formatted to FAT32 for compatibility.
• Make sure the RomUpdate.bin file is the correct firmware version for your specific receiver model.
• If the problem persists after following these steps, consider reaching out to Mediastar support for further assistance.

By following this guide, you can successfully troubleshoot boot problems on your Mediastar MS Diamond X1 and X2 satellite receivers, restoring normal functionality with ease.